Kanthal Wire ( N80 )
RM 0.00
Specification
Available wire diameter : 0.2 mm / 0.25 mm / 0.3 mm / 0.4 mm
| Grade | N80 |
| Max. continuous operating temp. | 1200°C |
| Nominal composition | 20%Cr, Ni - balance |
| Resistivity at 20°C | 1.09 ohm mm-2 m-1 |
| Density | 8.3 g/cm3 |
| Coefficient of thermal expansion, K-1 | 20-750°C : 16 x 10-6 20-1000°C : 17 x 10-6 |
| Thermal conductivity at 20°C | 15 W m-1 K-1 |
| Specific heat capacity at 20°C | 0.46 KJ kg-1 K-1 |
| Melting point | 1400°C |
Mechanical properties (approx.)
| Tensile strength | 810 N mm-2 |
| Yield point | 420 N mm-2 |
| Hardness | 180 Hv |
| Elogation at rupture | 30% |
| Tensile strength at 900°C | 100 N mm-2 |
Creep strength at 800°C Creep strength at 1000°C | 15 N mm-2 4 N mm-2 |
| Magnetic properties | Non |
| Emissivity, fully oxidized condition | 0.88 |
For other grades & diameters, kindly email us on your requirements
Terms & Conditions :
- The above picture is for illustration only
- All the above descriptions are subject to change without notice
- Delivery charges will apply to buyers from Sabah, Labuan & Sarawak
- International buyers, kindly contact us for shipping charges
- Free Shipping Within Peninsular Malaysia Only
- Delivery : approx. 3 to 5 working days ( Peninsular Malaysia )
approx. 7 to 10 working days ( Sabah, Labuan & Sarawak, subject to courier delivery schedule ) - Warranty : No
- Subject to minimum order quantities
For enquiries, kindly contact us @
Tel : +6012 728 1063
Email : enquiry@giitechnology.com