Optex Photosensor Model : AIT-500
               ( Through-beam Type )

Specifications :-

Detection range                                     : 5 m ( 16.5 Feet )
Supply voltage                                      : 12 to 24 VDC +/- 20%  Ripple (P-P) 20% max. ( Reverse Polarity Proof )
Current consumption                             : 50 mA max.
Respone time                                        : 1 msec max.
Output : NPN Universal / Max Voltage : 30 VDC  Max. Current : 100 mA
Selection of operating mode                  : Control Cable (Green) - Connected to (Red)  + V " Light On " / Connected to
                                                              (Black) 0 V " Dark On "
Indicator                                               : Unstable Interruption ( Yellow ) Incident ( Red ) Stable Incident ( Green )
                                                              ( Through-Beam Type - ( Transmitter ) Front Power Indicator * ( Receiver )
                                                               Front Light Incident Indicator )
Sensitivity adjustment                             : COARSE Adjustment .  Fine Adjustment / 2 Degree Adjustment
Environment Illumination                        : Sunlight 30,000 lx max.  Halogen light 10,000 lx max.
Protection category / housing material    : IP 66   / unit : PBT Tempered Glassfiber        Optics : P.C
Operating temperatures/ humidity range : -25 deg. C to +60 deg. C ( -4.4 deg. F to +140 deg. F ) / 85 % RH max.
Cable                                                   : 0.2 mm2 x 4 oilproof   Standard length 2 m ( 0.3 mm 2 or move enable 100 m length wiring max. )